Optical Fiber Bandpass Filter(BPF) WDM FTTX 1550nm FM-FWDM-1550-BPF

FM SKU#:SKU00339I
Model#:FM-FWDM-1550-BPF
MFG PART#:

Optical Fiber Bandpass Filter(BPF) WDM FTTX 1550nm FM-FWDM-1550-BPF

The optical filter is an instrument that is used for wavelength selection, which can select required wavelengths from a large number of wavelengths and reject the addition wavelengths. It can used in wavelength selection, the noise filter of the optical amplifier, gain equalization, optical multiplexing /demultiplexing.

Our Optical Optical Fiber Bandpass Filter(BPF) WDM FTTX 1550nm FM-FWDM-1550-BPF is based on proven thin-film filter technology. This BPF is widely used in fiber optical communication systems and EDFA where flat and broad operating bands are needed.

Key Features

Broad operating band

High channel isolation

High stability and reliability

Length: 1M

Fiber Diameter: 0.9mm

Connector: FC/UPC

Applications

EDFA

WDM systems

CATV

Specification

Parameter  Type	BPF-1*1-T1550±20
Operating wavelength (nm)	1460～1620
Transmission band wavelength (nm)	1550±20
Reflection band wavelength (nm)	1460～1515&1585~1620
Transmission insertion loss (dB)	≤0.6
Transmission channel isolation	≥20
@ 1460～1515&1585~1620 (dB)
Channel flatness (dB)	≤0.3
Return loss (dB)	≥50
PDL (dB)	≤0.1
Wavelength thermal stability (nm/℃)	≤0.003
Insertion loss thermal stability (dB/℃)	≤0.005
Power handling (mW)	≤500
Operating temperature (℃)	-5 ~ +70
Storage temperature (℃)	-40 ~ +85
Fiber Type	SMF-28e
*The above specification is without connector.
**Other specifications can be made on customer request.

Why Fiber Cabling Is Predominantly Accepted Today

by www.fiber-mart.com

Copper wires and cables accompanied us in telecommunication for the past so many years. It was an excellent medium of communication or get linked to feel happy. Gradually technology brought out more complex steps to achieve out individuals the quickest mode not minding the geographical boundaries.

 

With the time, technology introduced fiber optic rather than copper wire. Now individuals are experiencing the gift of technology knowingly or unknowingly. Telephone cabling, fiber cabling, and cabling services are helping people to enjoy communication too the fullest. As a result if we go back within the good reputation for telecommunication we once had fiber connectivity.

 

Fiber cabling wasn’t whatsoever new concept entirely. It had been available through cabling services long since. But now it’s been prevailed more dominantly. Development and research have proved that this cabling is highly economical. Hence every company has started adopting this cabling system. The potential studies have successfully increased the capacity of these fiber cabling. Now it’s been increased exhaustively. Fiber cabling services are simple and easy , comfortable to make use of and the price is highly affordable. Both of these properties of fiber cabling forced telecommunication fraternity to adopt fiber cabling happily.

 

Fiber cabling has become the spinal cord in cabling services or cabling systems worldwide. Now let’s have a look on its advantages. Fiber cabling safeguards your security all the 4 sides. This quality helps government organizations and bank very much where security is a main concern. Another critical feature is speed where data could be transmitted. This selection is very advantageous to health care industry. So hospitals install this fiber cabling because of the result it produces. It has been proved life saving in many of cases.

 

Fiber cabling also acts as intrusion prevention in cabling services or cabling systems. It can protect your cabling all sorts of intrusion. Fiber cabling can provide you longer length with smaller diameter clubbed with lightest weight. Installation and upgrade is very easy. You can get it completed with assistance of a professional. There’s two kinds of fiber cabling you are able to decide based on your requirements. One is single mode fiber and the other one is multimode. Multiple mode has multi paths to achieve its destination. And because the name indicates, single mode only has one road to reach the destination too.

 

After using a thorough survey, you can choose which one you have to choose. Seek the help of the professional for installation. And let them know what type installation you’ll need particularly, whether indoor installation or out door. Indoor installation means that you needn’t to worry about environmental surroundings disturbances. Fiber cabling, through telephone cabling and cabling services possess a small check list. That’s firstly you have to choose if installing fiber through inner duct would work for you. You will want to decide on the distance. Finally you have to visit method, which method you have to adopt.

Typical Fiber Patch Panel Types On The Market

by www.fiber-mart.com

With the Internet of Things on the rise, more and more electric devices such as building automation controls, LED lights are becoming IP enabled and linking to the cabling infrastructure. There may be scenarios where linked data cables are not seen everywhere when connecting all the devices. Instead, a mass of patch cables are terminated in the telecommunication rooms. Technicians choose different fiber optic patch panel types to terminate the data cables and provide access to the cable’s individual fibers for cross-connection. So what are the typical fiber patch panel types on the market? This article will help you find something.

 

Benefits of Using Fiber Patch Panel

Fiber patch panels provide a convenient way to rearrange data cable connections and circuits. Using fiber patch panels, network technicians can easily connect cable fibers via cross connection, test the patch panel, and connect it to lightwave equipment. These patch panels are also used as a link demarcation point and in labeling the cable’s individual fibers. All in all, using fiber patch panel can achieve cable management including cable identification, and cable pulling.

 

Typical Fiber Patch Panel Types On The Market

Commonly, typical fiber patch panels are divided in two types, the rack mount and wall mount type.

 

rack mount

Rack mount patch panel is generally made for standard 19 inch rack mounting. To provide the best products and services to the customers, fiber-mart.COM launches the FHD and FHX series products.

 

The FHD rack mount fiber patch panels are available in 1U, 2U and 4U rack. They are made of SPCC materials with the sliding types like a drawer. Sliding the panel open allows users to push or pull cables more stable as well as faster. There are trays and splice sleeves, accessories, inside the patch panel, which are designed to hold fiber adapter panels or MPO/MTP cassettes.

 

ack mount fiber patch panel

 

fiber-mart.COM releases the 1U FHX rack mount ultra high density fiber enclosure in order to meet the requirements of most extreme fiber density conditions. With 3 independently sliding drawers, it can support 12 port cassettes or panel. Therefore, in 1 rack unit, the FHX ultra rack mount enclosure can handle up to 144 fiber cables connections.

 

FHX ultra rack mount fiber enclosure

 

wall mount

Wall mount type is the fiber enclosure that can be mounted on walls. fiber-mart.COM offers FHD wall mount fiber patch panels which have the designs of 2 door 2 adapters and 2 door 4 adapters as the option. It’s usually equipped with high density cassettes fixed on walls. The cassettes are in a space-saving and mountable panel enclosure. Wall mount patch panel benefits from several aspects like space saving. For more details, you can refer to Introduction of FHD Wall Mount Patch Panel.

 

FHD wall mount fiber patch panel

 

Advice On Choosing Suitable Fiber Patch Panel Type

Choosing a suitable fiber patch panel type is the wise practice. Port density, rack size and space should be considered when buying fiber patch panel. Both rack mount and wall mount patch panel are the effective measures for cable management. If there is no enough space in network place and not too many fiber cables around, the wall mount fiber patch panel is a better choice. Otherwise, you will need a rack on which you can place your cable panel.

 

fiber-mart.COM offers different fiber patch panel types with super quality to help customers optimize the telecommunication project. Hope we are the priority selection when you purchase networking equipment.

Things You Should Know About WDM Filter

by www.fiber-mart.com

The optical devices most often used to selectively transmit certain wavelengths are called filter, which covers a broad range of devices, including attenuators. Filters play important roles in Wavelength Division Multiplexing(WDM) systems, although other technologies also may be used. WDM Filters can separate or combine optical signals carried on different wavelengths in a cost-effective manner.

 

In the world of optics, “filter” often is a broad term applied to components that filter out part of the incident light and transmit the rest. In WDM systems, the wavelengths that are not transmitted through the filter normally are reflected so they can go elsewhere in the system. Such filters are like mirror shades or one-way mirrors, which reflect most incident light, but transmit enough for you to see through them.

 

Common optical filters accommodate channel growth without service interruption. In addition, the filters’ low network-to-express loss allows stacking, which is essential for scaling new wavelengths. Most filters are equipped with an express port to pass through non-dropped/added WDM channels. Interconnecting express ports of two filters forms an Optical Add/Drop Multiplexer (OADM) with east/west fiber connections. High filter isolation eliminates disruptive “shadow” wavelengths and allows channels that have been dropped at a node to be used elsewhere downstream.

 

Interference filters and other technologies can be used to separate and combine wavelengths in WDM systems. Several approaches are now competing for WDM applications, some technologies appear to have advantages for certain types of WDM systems, but the field is still evolving, and no single approach dominates. Although these technologies work in different ways, they can achieve the common goal of optical multiplexing and demultiplexing.

 

There are three competing filtration technologies: Thin Film Filters (TFF), Array Waveguides (AWG), and Fiber Bragg Gratings (FBG). Thin film filters were adopted very early and have been widely deployed because they have the unique attributes that meet the stringent requirements of optical communication systems.

 

Wide band WDM filters – They are used in EDFAs as pump couplers and supervisory channel monitors. This family of filters covers a wide variety of other filters. Their applications range from CWDM (Coarse WDM), to bi-directional transceivers, to 1310/1490/1550 nm tri-band filters for fiber to the home (FTTH).

 

Fiber Bragg gratings work similarly by reflecting specific wavelengths. WDM applications require the use of many interference filters or fiber gratings, with each one picking off an individual wavelength or group of wavelengths.

 

FTTX Filter WDM module is based on thin film filter technology. FiberStore Filter-Based WDM product family covers following wavelength windows commonly used in optical fiber systems: 1310/1550nm (for WDM or DWDM optical communications), 1480/1550nm (for high-power DWDM optical amplifier/EDFA), 1510/1550nm (for DWDM multi-channel optical networks) and 980/1550nm (for high performance DWDM optical amplifier/EDFA) and 1310/1490/1550nm (for PON/FTTX/test instrument). Compared with fused fiber WDM couplers, filter-based WDM components have much wider operating bandwidth, lower insertion loss, higher power handling, high isolation, etc.

Duplex OM4 Multimode Armored Fiber Patch Cable

FC-SC Duplex 10G OM4 50/125 Mulitmode Armored Fiber Patch Cable

Fiber Patch Cables also known as fiber jumpers or fiber patch cords.Fiber optic patch cable is one of most commonly used components in fiber optic network.
10G fiber optic patch cables provide 10 gigabit data transfer speeds in high bandwidth applications and they are 5 times faster than standard 50um fiber cable. Works with both VCSEL laser and LED sources. Our 10G fiber optic patch cables are 100% optically tested for maximum performance. We have all lengths and connectors available.
And for 10G OM3 50/125 Mulitmode Armored Fiber Patch Cable and 10G OM4 50/125 Mulitmode Armored Fiber Patch Cable, their main difference are as following:
A. OM4 was developed specifically for VSCEL laser transmission and allows 10 Gig /second link distances of up to 550 Meters (compared to 300M with OM3).
B. The effective modal bandwidth for OM4 is more than double that of OM3. For OM4 patch cable, it is 4700 MHz.km while for OM3, it is 2000 MHz.km.
Warm Tips:The default fiber diameter for the cable is 3.0mm,if you'd like to customize other types as 0.9mm,2.0mm,please kindly enquiry us. (The diameter is refer to the thickness of the cable,the size is able to match the corresponding equipment port.)

Key Features

• FC-SC Connectors
• Multimode Duplex fiber optic cable
• Micron: 50/125um
• Complete with Lucent Technologies aqua jacket
• Bandwidth transmitting rates up to 10 gigabits
• All of our fiber optic patch cables feature the high degree connectors
• 100% optically tested to ensure high performance
• Color: Water blue
• Fiber class: OM4

Specifications

Specification

Unit

FC, SC, LC/Armored Cables

ST, MU

MT-RJ, MPO

E2000

Single-mode

Multi-mode

Single-mode

Multi-mode

Single-mode

Multi-mode

Single-mode

PC

UPC

APC

PC

PC

UPC

PC

PC

UPC

PC

PC

APC

Insertion loss

dB

≤0.3

≤0.2

≤0.3

≤0.2

≤0.3

≤0.2

≤0.2

≤0.3

≤0.2

≤0.2

≤0.3

≤0.3

Return loss

dB

≥45

≥50

≥60

≥30

≥45

≥50

≥30

≥45

≥50

≥35

≥55

≥75

Wavelength

nm

850，1310,1510

850，1310,1510

850，1310,1510

850，1310,1510

Interchangeability

dB

≤0.2

≤0.2

≤0.2

≤0.2

Vibration

dB

≤0.2

≤0.2

≤0.2

≤0.2

Operating temperature

℃

-40~75

-40~75

-40~75

-40~75

Storage temperature

℃

-45~85

-45~85

-45~85

-45~85

Cable diameter

mm

φ3.0,φ2.0,φ0.9

φ3.0,φ2.0,φ0.9

φ3.0,φ2.0,φ0.9

φ3.0,φ2.0,φ0.9

Duplex Singlemode Armored Patch Cable

FC/UPC to LC/UPC Duplex Singlemode 9/125 Armored Patch Cable

Armored patch cable can be deployed directly in different harsh environment, without additional tube for protection, save space, reduce construction cost, and make the maintenance more conveniently. This Duplex Singlemode Armored Standard fiber optic cable constructed with highest quality components for unmatched durability and reliability. With a Standard Boot on each end. This cable is appropriate for use in data centers and networks with 10GbE and 8G FC applications.
With OFNR (Riser)/OFNP(Plenum) and 3.0mm thickness, this Armored Fiber Optic cable is specifically designed for light to medium duty indoor/outdoor applications. Its rugged shell with steel and kevlar is 10 times stronger than regular Fiber Optic Cable and has a 40% higher rated range of operating temperature. Deploy this cable in environments where networking equipment undergo repeated abuse.
Fiber-Mart Singlemode 9/125 armored patch cable provide 1Gigabit data transfer speeds in high bandwidth application, up to 5 times faster than standard 9/125um fiber patch cable. With Fiber-Mart good development, we can offer more and more competitive price on a relatively higher-end heavy armored patch cables.

Warm Tips:The default fiber diameter for the cable is 3.0mm,if you'd like to customize other types as 0.9mm,2.0mm,please kindly enquiry us. (The diameter is refer to the thickness of the cable,the size is able to match the corresponding equipment port.)
Features

• Stainless steel tube & metal braid under outer LSZH jacket
• Micro diameter stainless steel tube for protection
• High resistance of tensile strength, pressure, rodent bite
• Without damage by construction
• Ensure transmission power and avoid additional attenuation
• Prevent optic fiber from destroy by harsh environment
• Prevent optic fiber from destroy by improper operation

Applications

• FTTH, LAN, Test equipment, Military industry
• CATV
• Measuring equipments
• Fiber optic communication system
• Optical active component and equipment

Item information

• Fiber: Duplex Singlemode 9/125 Fiber Optic Cable
• Connector: FC-LC Connectors at ends
• Cable Jacket: Armored/Military Tactical
• OFNR (Riser) Rated
• Standard Boot on each end
• Color: SM Blue

Structures

Each light armored patch cable is inserted in a protective flexible stainless steel tube as you see in the picture.

Custom OEM
Fiber-Mart offer customization solutions as below:

• Any Fiber Type- 10G OM4 optical fiber, 10G OM3 optical fiber, Single-mode 9/125 optical fiber, OM1 Multimode 62.5/125 optical fiber and OM2 Multimode 50/125 optical fiber for choice.
• Any connectors- FC, ST, LC, SC, MTRJ, E2000, MU etc connectors for choice.
• Any lengths- 1m, 2m, 3m, 4m ...100m... no limits.
• Label or Logo customs- we can print customer logo on fiber patch cable (as the following)

ConnectorType	FC to LC
FiberType	Singlemode 9/125
Length	3m
EndfaceType（nm）	PC	UPC	APC
InsertionLoss（dB）	≤0.20	≤0.20	≤0.30
Repeatability（dB）	≤0.10
Exchangeability（dB）	≤0.20
ReturnLoss（dB）	≥45	≥50	≥60
CoreDiameter	9.2µm±0.4µm@1310nm
CladdingDiameter	125µm±1µm
OuterDiameter	3.2mm±0.10mm
Max.Attenuation	0.5dB/km@1310nm 0.4dB/km@1550nm
Min Static Bend	10D
Min Dynamic Bend	15D
TensileLoad(longterm)	200N
TensileLoad(shortterm)	400N
Crush(longterm)	3000N/100mm
OperationTemperature(℃)	-25℃~+70℃
StorageTemperature(℃)	-40℃~+85℃
Durability(time)	>1000times
IndustryStandard	TelcordiaGR-326-CORE

Duplex Multimode OM1 Armored Patch Cable

FC/UPC to LC/UPC Duplex Multimode 62.5/125 OM1 Armored Patch Cable

Armored patch cable can be deployed directly in different harsh environment, without additional tube for protection, save space, reduce construction cost, and make the maintenance more conveniently. This Duplex Multimode Armored Standard fiber optic cable constructed with highest quality components for unmatched durability and reliability. With a Standard Boot on each end. This cable is appropriate for use in data centers and networks with 10G FC applications.

With OFNR (Riser)/OFNP(Plenum) and 3.0mm thickness, this Armored Fiber Optic cable is specifically designed for light to medium duty indoor/outdoor applications. Its rugged shell with steel and kevlar is 10 times stronger than regular Fiber Optic Cable and has a 40% higher rated range of operating temperature. Deploy this cable in environments where networking equipment undergo repeated abuse.

Fiber-Mart Multimode 62.5/125 armored patch cable provide 1Gigabit data transfer speeds in high bandwidth application, up to 5 times faster than standard 62.5/125um fiber patch cable. With Fiber-Mart good development, we can offer more and more competitive price on a relatively higher-end heavy armored patch cables.

Warm Tips:The default fiber diameter for the cable is 3.0mm,if you'd like to customize other types as 0.9mm,2.0mm,please kindly enquiry us. (The diameter is refer to the thickness of the cable,the size is able to match the corresponding equipment port.)
Features

• Stainless steel tube & metal braid under outer LSZH jacket
• Micro diameter stainless steel tube for protection
• High resistance of tensile strength, pressure, rodent bite
• Without damage by construction
• Ensure transmission power and avoid additional attenuation
• Prevent optic fiber from destroy by harsh environment
• Prevent optic fiber from destroy by improper operation

Applications

• FTTH, LAN, Test equipment, Military industry
• CATV
• Measuring equipments
• Fiber optic communication system
• Optical active component and equipment

Item information

• Fiber: Duplex OM1 62.5/125 Multimode Fiber Optic Cable
• Connector: FC-LC Connectors at ends
• Cable Jacket: Armored/Military Tactical
• OFNR (Riser) Rated
• Standard Boot on each end
• Color: Gray

Structures

Each light armored patch cable is inserted in a protective flexible stainless steel tube as you see in the picture.
Custom OEM
Fiber-Mart offer customization solutions as below:

• Any Fiber Type- 10G OM4 optical fiber, 10G OM3 optical fiber, Single-mode 9/125 optical fiber, OM1 Multimode 62.5/125 optical fiber and OM2 Multimode 50/125 optical fiber for choice.
• Any connectors- FC, ST, LC, SC, MTRJ, E2000, MU etc connectors for choice.
• Any lengths- 1m, 2m, 3m, 4m ...100m... no limits.
• Label or Logo customs- we can print customer logo on fiber patch cable at this position:

ConnectorType	FC to LC
FiberType	Multimode OM1 62.5/125
Length	3m
EndfaceType（nm）	PC	UPC	APC
InsertionLoss（dB）	≤0.20	≤0.20	≤0.30
Repeatability（dB）	≤0.10
Exchangeability（dB）	≤0.20
ReturnLoss（dB）	≥45	≥50	≥60
CoreDiameter	62.5µm±2.5µm
CladdingDiameter	125µm±1µm
OuterDiameter	3.2mm±0.10mm
Max.Attenuation	3.5dB/km@850nm 1.5dB/km@1350nm
Min Static Bend	10D
Min Dynamic Bend	15D
TensileLoad(longterm)	400N
TensileLoad(shortterm)	400N
Crush(longterm)	3000N/100mm
Crush(Shortterm)	5000N/100mm
OperationTemperature(℃)	-25℃~+70℃
StorageTemperature(℃)	-40℃~+85℃
Durability(time)	>1000times
IndustryStandard	TelcordiaGR-326-CORE